Move to view larger images


120W mAT-30 HF Auto-tuner Auto Tuner Automatic Antenna Ham Radio for Yeasu

Price: $172.62
SKU: 137486
Price in points: 1726 points
Points: 16 points

US_NJ/UK_CK1/DE_EK/CA_CK1/AU_CK1 Local stock!!!

Our wholesale prices:

Quantity  5+   20+   50+   100+ 
Price  $165.72   $160.54   $157.09   $153.63 

120W mAT-30 HF Auto-tuner Auto Tuner Automatic Antenna Ham Radio for Yeasu


- The mAT-30 is an automatic tuner intended for use with modern Yaesu transceivers.It works with some Yeasu transceiver that supports an FC-30 , FC-40 or FC-50 Yeasu tuner;a partial list of compatible units includes:FT-100,FT-857,FT-897,FT-450D,FT-891.The interface cable is included.The operating is the same as the method of the Yeasu tuner, which is simple and convenient. The mAT-30 can work within the range of 3MHz to 54MHz.
- The mAT-30 connects to the radio via its CAT/LINEAR jack to control the  tuning cycle;the transceivers Tune button controls the tuner.The  CAT/LINEAR jack also powers the tuner,so it requires no external power supply. The mAT-30 is specially engineered to integrate with your Yeasu FT-100/857/897/450D/891 HF radio.Tuning is performed when the TUNE button is pushed
on the front of the transceiver and held for one second.
- The mAT-30 provides automatic antenna tuning across the entire HF spectrum plus 6 meters,at power levels up to 120 watts.It will tune dipoles,verticals,Yagis,or virtually any coax-fed antenna.It will match an amazing range  of antennas and impedance, far greater than some other tuners you may have considered,including the built-in tuners on many radios.
- The mAT-30 is specially engineered to integrate with your Yeasu FT-100/857/897/450D/891 HF radio.The mAT-30 connects to the CAT  (Computer Automated Transceiver) port on the back of the radio.The CAT interface allows an external device such as a PC or the mAT-30 to control the FT-100/857/897/450D/891 by sending it serial commands.The mAT-30 takes advantage of this interface to simplify the tuning process --one button push is all that is needed in order to switch the radio to FM mode, reduce output power, transmit a carrier, measure the transmit frequency,and then restore the radio to its previous mode and power level!
- The mAT-30 also features advanced memory tuning,providing 16000 memory locations;when tuning near a previously used frequency it will recall the settings for nearly instant tuning.It learns your favorite frequencies and bands as you use it.You can also start a tuning cycle manually whenever necessary.
- The mAT-30 has16,000 frequency memories.When tuning on or near a previously tuned frequency,the mAT-30 uses "Memory Tune" to recall the previous tuning parameters in a fraction of a second.If no memorized settings are available,the tuner runs a full tuning cycle, storing the parameters for memory recall on subsequent tuning cycles on that frequency. In this manner, the mAT-30 "learns" as it is   to the bands and frequencies as it goes.


- 0.1 to 120watts SSB and CW peak power,30 watts on PSK and digital modes,and 100 watts on 6 meters.
- Latching relays for ultra
- Low power operation.
- 16,000 memories for instantaneous frequency and band changing.
- Controlled from YeasuTUNE button on radio.Powered from Yeasu radio.
- Works with most Yeasu radios that are FC-30,FC-40 or FC-50 compatible.
- Partial radio list: FT-100,FT-857,FT-897,FT-450D,FT-891.
- Tuning time:0.1 to 5 seconds full tune,0.1 seconds memory tune.
- 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
- Tunes 5 to 1500 ohm loads.
- For dipoles,verticals,Vees,beams,long wire or any coax-fed antenna.
- Includes interface cable.
- Dimensions:20x13x4cm (LxWxH).
- Weight:0.8Kg

Package Included:

- 1 x mAT-30 HF-SSB Automatic Antenna Tuner
- 1 x Connecting cable

Previous: DZ260 Commercial Vacuum Sealer Food Sealing Packing Machine

NextDJI Mavic Air Pro Platinum Tablet Holder Adapter for 4-10" iPad iPhone Android Phone

Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!

No posts found