Categories
new

Move to view larger images

new

8W WiFi Wireless 2.4GHz 802.11 Signal Extender Range Booster Amplifier Repeater

Price: $64.18
SKU: 125333
0
diggs
Price in points: 642 points
Points: 6 points
Description

8W WiFi Wireless 2.4GHz 802.11 Signal Extender Range Booster Amplifier Repeater

Description:
- Low-noise receive gain.
- Signal activity LED indicates
- High Gain, High Value, High Performance.
- Maximum output power of 8000mW by the Booster.
- Plug-and-play, Easy installation, no driver needed.
- Ideal for increase the 2400-2500Mhz frequency devices.
- Increase the effective range and coverage area of your Wi-Fi network.
- Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow.
- The amplified wireless signal may even penetrate complex environments with many walls and obstacles.
- Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode only).

NOTE: The item need to connect to a Access Point or Router which is NOT included.

Specifications:
- Operation Range: 2400-2500 MHz.
- Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing.
- Frequency Response: ± 1dB over operation range.
- Input Power: 3dBm (Min.)-20dBm (Max.).
- Input Power 5 ~ 20 dBm.
- Optimal Input Power: 9 ~ 13 dBm.
- Output Power: 8000mW/39dBm nominal for 802.11b/11Mbps.
- Connector: SMA Receptacle, 50 ohm.
- Transmit Gain: 17dBm nominal.
- Receiver Gain: 11dBm.
- Receive Noise Figure: 3.0dBm nominal.
- Operating Temperature: -40 to 70 degree.
- Operating Humidity: Up to 95% relative humidity.
- Material: Cast Aluminium.
- Size:10.3cm x 7.7cm x 2.1cm

Package Included:
- 1 x Signal Booster
- 1 x Power plug
- 1 x SMA cable
- 1 x 6Dbi antenna

Instruction:
Step 01: Remove the Antenna from the Wireless Router / Access Point.
Step 02: Use this cable (RG316) to connect Amplifier 'input' port with router 'output' port: note that cable is in standard spec.
Step 03: Connect the antenna with 'output' port of Amplifier.
Step 04: Power the amplifier with the matching source adapter: DC 12V.

Previous: 2 Cylinder 12V Car Air Pump Compressor 4x4 4WD Tyre Inflator 85L/min 150PSI

NextWavlink High Power Wireless Router AC1200 Dual Band 802.11AC WiFi Range Extender

Reviews
Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!


No posts found
 

Discussions

Loading...
122