Categories
ATG RD290 Hexacopter Mixed Carbon Fiber Folding Frame Kit with CC3D Flight Control  Landing Skid Gear 2204 Motor 10A ESC 5040 Prop

Move to view larger images

ATG RD290 Hexacopter Mixed Carbon Fiber Folding Frame Kit with CC3D Flight Control Landing Skid Gear 2204 Motor 10A ESC 5040 Prop

Price: $163.93
SKU: 112577
0
diggs
Price in points: 1639 points
Points: 15 points
Description

ATG RD290 Hexacopter Mixed Carbon Fiber Folding Frame Kit with CC3D Flight Control Landing Skid Gear 2204 Motor 10A ESC 5040 Prop

ATG RD290 hexacopter frame set
Specification:
- Material: Mixed carbon fiber
- Center board thickness: 1.5mm
- Main shaft thinkness: 3mm
- Wheelbase: 290mm
- Aluminum nut: M3X35mm
- Aluminum washer: M3X3mm
- With alumina pillar landing gear

MT 2204 KV2300 Brushless motor
Specification:
- KV: 2300
- Thread: CW/CCW
- Max thrust: 440g
- No.of cell: 2-3S
- Length: 32.2mm
- Framework: 12N14P
- Shaft: 3mm
- Diameter: 27.9mm
- Length: 32.2mm

Hobbywing Flyfun 10A Brushless ESC
- Output:  Continuous 10A, Burst 12A up to 10 seconds.
- Input Voltage:  2-4 cells lithium battery or 5-12 cells NiCd/NiMh battery.  
- BEC: 1A / 5V Linear mode BEC.
- Refresh rate of the throttle signal: 50Hz to 432Hz.
- Max Speed:  210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
      (BLM = BrushLess Motor)
- Size: 38mm*18mm*6mm.
- Weight:  9.4g

CC3D Flight Controller Introduction: 
OpenPilot is a next-generation Open Source UAV autopilot. It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. It has been designed from the ground up by a community of passionate developers from around the globe, with its core design principals being quality, safety, and ease of use.? Simplicity does not come with any compromises either: with no hard-coded settings, a complete flight plan scripting language and other powerful features, OpenPilot is an extremely capable UAV autopilot platform.

ATG 5040 propeller
- Size: 5*4 inch
- Weight: 2g/pc
- Center hole diameter: 5mm

Package listing:
- 1 * ATG RD290 Hexacopter frame kit
- 1 * aluminum pillar landing gear
- 1 * CC3D flight control
- 3 * CW MT 2204 Motor
- 3* CCW 2204 Motor
- 6 * Hobbywing Flyfun 10A ESC
- 3 * CW 5040 propeller
- 3 * CCW 5040 propeller
- 1 * PCB board
- 10 * Tightening strap
- 1 * battery strap
- 2 * 3M sticker

Previous: ATG 5040 5*4 inch Propeller CW/CCW 1-Pair for RC QAV250 Multicopter

NextATG RD290 Hexacopter Mixed Carbon Fiber Folding Frame Kit with Landing Skid Gear 2204 Motor 10A ESC 5040 Prop

Reviews
Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!


No posts found
 

Discussions

Loading...
122