CCTV Keyboard Controller LCD Display for PTZ camera STA-2DX

Move to view larger images

CCTV Keyboard Controller LCD Display for PTZ camera STA-2DX

Price: $90.82
SKU: 59322
Price in points: 908 points
Points: 9 points

Our wholesale prices:

Quantity  5+   20+   50+   100+ 
Price  $90.82   $90.82   $90.82   $90.82 

CCTV Keyboard Controller LCD Display for PTZ camera STA-2DX

The DVR keyboard can be used simultaneously with the DVR mainframe and built-in hard disk VCR to control matching terminal products, such as high/constant- speed dome cameras, decoders, etc. The electric outlet between the controlling keyboard and the receiving terminal is EIA/RS – 485, which enables the keyboard to control as many as 127 dome cameras or other terminals within a maximal communication range of 1.5 Km.

- LCD display, as man-machine interface, LCD display board is more intuitionist, convenient, each to understand, plentiful information, etc.
- In-built multi-protocol: Pelco-D, Pelco-P, Pelco-D1, Pelco-P1, New
- maximum 1.5KM** (4900ft) long communication distance, ideal for applications where a Gate House or Security Lodge is located a distance from the installed unit.
- Can be combined to control the PTZ camera with a Stand alone DVR
- Maximum controllable 128 units PTZ cameras
- The keyboard output adopts photoelectric insulated 485 control, which provides strong anti-jamming and long-range transmission.
- The range for dome camera or decoder address setup: 1~255.
- Variable-speed operation can be applied to the built-in dome of the high speed dome camera.
- Pre-set positions can be setup and previewed in the high speed dome camera.
- Up to 4 tour routes can be setup and previewed in the high speed dome camera, with each tour having a maximum of 16 pre-set positions, dwell time and speed for each pre-set positions programmable.
- The high speed dome camera can be manually / automatically controlled.
- Lens zoom ratio, focus and IRIS can be manually controlled.
- More than one terminals , such as dome cameras and decoders, can be controlled.
- Control can be realized by simultaneously using the DVR keyboard with one DVR mainframe or built-in hard disk VCR

- Power supply: DC9V 500mA
- Power adapter: AC220V±10% 50/60HZ switch to DC9V 500mA
- Communication connection mode: RS-485 for mainframe connection; RS-485 bus mode for controlling units connection
- Baud rate of communication: 1200/2400/4800/9600/19200 BIT/S
- Range of communication: 1500M (0.5MM twisted-pair)
- Dimension: 70(H)X 165(W)X 270(L)mm
- Temperature: 0℃~60℃
- Relative Humidity:90%RH

Previous: CCTV Keyboard Controller LCD Display for PTZ camera STA-3X

NextXbox 360 Wireless Network Adapter

Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!

No posts found