CNC Kit 3 Axis NEMA 23 Stepper Motor *3+ TB6560 Driver Controller

Price: $131.15

SKU: 61859

599

diggs

Price in points: 1231 points

Points: 12 points

Quantity:

Add to cart

Our wholesale prices:

Quantity	5+	20+	50+	100+
Price	$131.15	$131.15	$131.15	$131.15

Description

Features of TB6560 Driver:

Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset !
1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!
Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors
*Attention: This driver is the 1.5A-3A version, it's specially designed for stepper motors with rated current from 1.5A to 3A, it's NOT compatible with stepper motors with rated current below 1.5A or above 3A!
If the rated current your stepper motors is below 1.5A, you can choose the 0.5A-2.5A version!
Please let us know which version (1.5A-3A version is default) you need immediately after placing a bid!
Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment !
On board current switching - Power output can be set according to specific user requirement !
Full closed-type optical isolation to protect the user's computer and equipment
Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
4 channel inputs interface- Can be used for XYZ limit and emergency stop !
Professional design - Two stage signal processing with super anti-jamming !
Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect !
Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop !
Universal architecture - Supports most parallel software MACH3,KCAM4 etc!
*For compatibility with other softwares, please feel free to contact us!

Dip settings of TB6560 Driver:

Current Setting	1	2	Decay Mode Settings	3	4	MicroStep Settings	5	6
100%	ON	ON	FAST	ON	ON	1	ON	ON
75%	ON	OFF	25%	ON	OFF	1/2	ON	OFF
50%	OFF	ON	50%	OFF	ON	1/8	OFF	ON
25%	OFF	OFF	SLOW	OFF	OFF	1/16	OFF	OFF

Further Details of TB6560 Driver:

Power supply DC 12-36V (not included, please feel free to contact us if you need !)
*This driver get its power from the same unit as the steppers, it doesn't require a separate power source.
*Voltage Selection:
12-16V DC power supply for Nema 17 stepper motors
16-24V DC power supply for Nema 23 stepper motors
24-36V DC power supply for Nema 34 stepper motors
(High voltage will burn up the chips or stepper motors!!!)
*Ampertage Selection:
Output current of the power supply can be calculated by the following expressions:
Output current = Rated current of your stepper motors * quantity + 2A
(For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power supply is recommended, but higher power such as 24V 15A also will be good.
If you are not sure about the selection of power supply, please feel free to contact us for help)
The power output of 12V shall be applied to the radiator fan of 12V
Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
Suitable for unipolar or bipolar stepper motors.
Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.

Specification of 57BYGH56-401A Motor:

- Step Angle Accuracy: ±5%(full step, no load)
- Resistance Accuracy: ±10%
- Inductance Accuracy: ±20%
- Temperature Rise: 80℃CMax.(ratod current,2 phase on)
- Ambient Temperature: -10℃-+50℃
- Insulation Class: B
- Dielectric Strength: 500V AC for one minute
- Shaft Radial Play: 0.06Max.(450g-load)
- Shaft Axial Play: 0.08Max.(450 9-load)

Package include:

1 x 3 Axis TB6560 Stepper Motor Driver 1.5A-3A
5 x Connectors
1 x DB25 parallel cable
1 x CD software(English Manual & Mach3 demo version)
3 x 57BYGH56-401A Stepper motor

Previous: Rek RK-3030D Adjustable DC 0-30V 0-30A 900W Bench Power Supply

Next: CNC Kit 5 Axis NEMA 23 Stepper Motor *5+ TB6560 Driver Controller

Customer Videos

>>see all 3 videos, or post yours

Customer Images

>>see all 2 photos, or post yours

Reviews

Write a Review, Post Photos, Post Videos, and get GoodLuckBuy points!

Kind and nice

Posted by Paolo Pinsone on 03/10/2013, 02:29

Involvement:General (knows how to use it) - Ownership:1 day to 1 week

Price:

Ease of Use:

Build Quality:

Usefulness:

Overall Rating:

Pros:Nice entry level CNC kit, little tricky for newbies but still best choice! It is worth the price wich is the one of the cheapest on the web! Fast reply's of the GLB Team very nice support and kind.

Cons:The packing could have been a little better considering it has to travel far but it did his job.

Other Thoughts:Even though the order was placed during the festival and new year holiday, the shipping made it in an acceptable time !

Bottomline:It was my first time buy and i am glad i did choose this company, i will sure place more orders soon.

Very good by now

Posted by Željko Trauber on 12/24/2011, 21:09

Involvement:Expert (understands the inner workings) - Ownership:1 week to 1 month

Price:

Ease of Use:

Build Quality:

Usefulness:

Overall Rating:

Pros:By now buy 5 time and all the very good.

Cons:For the people who now something about CNC machines very good..

Other Thoughts:We can make CNC machine...

Bottomline:Wery good to work with this firma.

Fast!!! All OK except CD broken

Posted by Miguel Angel Casanova on 03/08/2011, 00:54

Involvement:Novice (still getting used to it) - Ownership:1 day to 1 week

Price:

Ease of Use:

Build Quality:

Usefulness:

Overall Rating:

Pros:The motors look great and the controller like good finished.

Cons:Broken CD. I have no manuals. Can I download it?

Other Thoughts:I'm waiting to try everything.

Bottomline:I'm happy! I can make my own CNC machine...

Move to view larger images

CNC Kit 3 Axis NEMA 23 Stepper Motor *3+ TB6560 Driver Controller

Our wholesale prices:

Customer Videos

Customer Images

Discussions