DSO 094 Dual Channel 10MHz 50MSa/s USB Virtual Digital Storage Oscilloscope

Move to view larger images

DSO 094 Dual Channel 10MHz 50MSa/s USB Virtual Digital Storage Oscilloscope

Price: $122.17
SKU: 113526
Price in points: 1222 points
Points: 11 points

DSO 094 Dual Channel 10MHz 50MSa/s USB Virtual Digital Storage Oscilloscope

DSO 094 is the first two-channel member of our oscilloscope family. It not only can work in commonly used Y/T mode but also work in Y/X mode. The Y/X mode opens a new measurement area since it can graph relationships of any two signals. It is also an USB oscilloscope .

DSO 094 is very easy and straightforward to use. No annoying command navigations. Parameters are logically grouped and can be fast adjusted with rotary encoder. Special operations are clearly listed and done by "modeless" menu which you can bring up and execute any time no matter what mode you was in. CLEN 094 comes with rugged enclosure and is battery powered This is ideal for field applications.

Now DSO 094 can also be used as PC oscilloscope
094 has some unique features that are not commonly found in many similar portable oscilloscopes:
It can be placed in "Persistent Display" mode that keeps waveforms on screen until you erase them.
This is very useful when combined with NORMAL trigger mode to capture and compare multiple waveforms that meet certain trig condition.
You can manually erase waveform and display. This will help you to get better viewing result especially for slow signal graphing.

- Y/T mode and Y/X mode selectable
- Save/Recall up to 4 captures
- Screen image hardcopy
- USB connection for data transfer and firmware upgrade
- Rotary encoder for quick parameter setting
- 10MHz analog bandwidth
- 50Msps real-time sampling rate on each channel
- Vertical sensitivity 10mV/Div to 2V/Div (1X probe) and 0.1V/Div to 20V/Div (10X probe)
- Record length 500 - 8000 points on each channel adjustable
- Trigger position adjustable and trig point indicated
- Trigger sensitivity 0.2div - 4div adjustable
- Save/Recall up to 4 captures of maximum record length
- Screen image hardcopy via USB
- Firmware upgradable via USB
- Battery/USB powered

- Number of Channel: 2
- Analog Bandwidth: 0 - 10MHz
- Sensitivity: 10mV/Div -- 2V/Div
- Resolution: 8-bit
- Input Impedance: 1M ohm/20pF
- Maximum Input voltage: 50Vpk (for 1X probe) and 400Vpk (for 10X probe)
- Coupling: DC, AC, GND

- Max Real-time Sampling Rate: 50MSps
-Timebase: 0.2us/Div - 10m(minute)/Div
- Record Length: 500 - 8000 points (each channel) changeable
- Run/Hold Modes: one button switchable

- Trigger Modes: Auto, Normal, Single
- Trigger Types: Rising/falling edge
- Trigger Sources: Ch 1 or Ch 2
- Trigger sensitivity 0.2div - 4div adjustable
- Trigger Position: 0% - 100% of capture buffer adjustable
- Trig Point Indicator: Yes

- 2-inch 128 X 64 black-and-white dot-matrix LCD
- Backlight ON/OFF control
- Contrast adjustable

Power supply
- 3.7V Li-ion battery/USB (battery is not included)
- Supply Current: 300mA @ 3.7V(LCD backlight ON, typical)
- Built-in charger
- 128*64 LCD display with backlit
- Dimension: 140*70*30mm
- Weight: 190g

Previous: 700TVL FPV HD 1/3'' SONY CCD Camera 2.8mm Lens with Camera Mount for QAV250 Quadcopter FPV

NextTS100 Digital LCD Prgramable Soldering Iron Station Built-in STM32 Chip with Pointed Welding Tip

Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!

No posts found