Categories
Fm Transmitter Full Range w/Thermometer & Clock & Torch USB Port CY-688

Move to view larger images

Fm Transmitter Full Range w/Thermometer & Clock & Torch USB Port CY-688 Fm Transmitter Full Range w/Thermometer & Clock & Torch USB Port CY-688

Fm Transmitter Full Range w/Thermometer & Clock & Torch USB Port CY-688

Fm Transmitter Full Range w/Thermometer & Clock & Torch USB Port CY-688

Price: $13.52
SKU: 59175
0
diggs
Price in points: 135 points
Points: 1 points
Out Of Stock

Our wholesale prices:

Quantity  5+   20+   50+   100+ 
Price  $12.98   $12.58   $12.31   $12.04 
Description

Fm Transmitter Full Range w/Thermometer & Clock & Torch USB Port CY-688

This device has build in the lithium battery inside, you can charge it via your computer or Cigarette lighter. Plug one end of the USB cable into the power connector. Plug the other end of the cable into a USB port on your computer or the adapter. REPLACE the adapter into the cigarette lighter.

Using the transmitter
- To turn on your transmitter by slide the ON/OFF switch to ON.
- Place the transmitter close to your radio.
- Select a frequency that is available/unused/on the FM band of your radio-i.e. a frequency that is not broadcasting a radio station.
- Switch on the transmitter by press the ON/OFF button.
- Connect the audio connecter to the audio output of your device: MP3 player, CD player or other. " Press the ON/OFF button so that the screen displays a frequency (e.g. 88.10MHz). The broadcast indication will be displayed on the screen.
- Adjust the transmitter to the same frequency as the one selected on your radio, using the up or down buttons.
- To put a frequency into the memory, press the Ml, M2, M3 button for 3 seconds.
- To use memorized frequency later, press one of the three Ml, M2, M3 buttons. Then adjust your radio to the same frequency.
-To switch off the transmitter, press the ON/OFF button for about 3 seconds. And then slide the ON/OFF switch to OFF.

Using the thermometer
When the transmitter is switched on, the ambient temperature is displayed in the top right-hand corner of the screen, alternately in degrees Celsius and Fahrenheit.

Using the clock
When the transmitter is switched on, the time is displayed on the screen.
- To SET THE TIME, Press SET for 3 seconds until the minutes flash on and off.
- Press the UP or DOWN button to scroll through the numbers.
- Press SET to confirm your choice.
- Repeat the same operations for the minute digitals as well as for the hour.
- To confirm your settings, touch nothing for 3 seconds.
- To display the time when the appliance is switched on: press ON/OFF button once.

Using the Pocket torch (flashlight)
- Make sure that the device is switched on.
- To light the torch: press simultaneously on the up or down buttons.
- To switch off the torch: Press on the up or down buttons again.
- Important: For make your battery life longer, please charge device for 12 hours before charged battery can be Continues using 5-6 hours.

Specification:
- Frequency response: 20Hz - 20KHz
- Separation: ≥50dB
- Operating Current: 30mA
- Transmission range: 87.5-108.0MHz (interval 0.1MHz)
- Power source: lithium battery or Cigarette lighter power.
- Transmit distance: > 5m
- Distortion 3% (F=75KHz. F1KHz)
- Signal to noise ratio ≥45dB.

Previous: Bluetooth Car Kit FM Modulator/Transmitter MP3 Player USB/SD/MMC Slot w/Remote

NextGPS Tracker Hard-wired Car Charger Plug Adaptor

Reviews
Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!


No posts found
 

Discussions

Loading...
122