Categories
new

Move to view larger images

HX-SXPWM-A AC90V-260V Input DC48V Output 8A PWM DC Motor Speed Controller Driver

Price: $66.23
SKU: 120027
0
diggs
Price in points: 662 points
Points: 6 points

Our wholesale prices:

Quantity  5+   20+   50+   100+ 
Price  $63.58   $61.59   $60.27   $58.94 
Description

HX-SXPWM-A AC90V-260V Input DC48V Output 8A PWM DC Motor Speed Controller Driver

Features:
- the input power supply (VAC): AC90-260V 50 / 60Hz (for global voltage)
- the output armature voltage range (VDC): DC48V
- the output armature current range (A): 8A (0.1A-10A can be arbitrarily set)
If the current is too big need to increase the heat
- the output excitation voltage range (VDC): 100/200 (default full-bridge rectifier, which is 0.9 times the input voltage) 5, the output excitation current range (A): 1A
- the working frequency: 16 KHz
- given signal mode (V / mA): default potentiometer, 0-5V, 0-10V, 4-20mA, PWM, touchtone
- enable control mode (EN): switch
- soft start (acceleration time adjustment range) (S): 0-10S (default 2 seconds)
- soft stop (deceleration time adjustment range) (S): 0-10S (default 2 seconds)
- double loop PI regulation (voltage and current) control is more reliable
- IR torque compensation range: 0-100% (default 0)
- overcurrent range: 0 setpoint (default 8A)
- overcurrent mode: stop output and indication (display code E1)
- short-circuit protection: stop output and indication (display code E0)
- overheat protection: power tube temperature exceeds 100 ° off the output and the indication (display code E2)
- built-in digital display module can display real-time operating voltage with current
- Dimensions: Length 140mm × 98mm × height 38mm width
- Connection: terminal type (convenient)

Advantages:
- using pulse technology to speed more stable, low speed forceful
- with a short circuit, overcurrent, overtemperature protection cutoff device to make more reliable performance
- with the elimination of soft starter motor starting current is too large
- high and low voltage signal is completely isolated, the use of safer

Precautions:
1, the governor closed the input power,
Touched by hand within a minute ban high-voltage terminal,
There are high-voltage capacitors,
To prevent electric shock!!!
2, for the two lines of DC permanent magnet motor,
Two lead wires connected directly to the armature M + with M-.
Prohibit access exciting!

Instruction manual:
PWM signal requirements:
1, the default PWM signal level is 5V, the signal frequency 1KHZ above, with a load capacity of more than 0.5MA.

2,5V level without resistors in series with PWM input port,
10V PWM level from 0-10V input port or serial port 10K resistor in the PWM input,
12V level 3.9K resistor string from 0-10V input port or serial port 13.7K PWM input resistors,
24V level string 27K resistor from 0-10V input port or serial port 16.8K resistor PWM input

Package included:
- 1*HX-SXPWM-A AC90V-260V Input DC48V Output 8A PWM DC Motor Speed Controller Driver

Previous: ER11 48V 400W Brush High-speed Air-cooled Spindle Motor Engraving Machine Spindle Kit

NextHY-TR DC7-12V 5A Hardware Auto Start Switch Module Board Time Setting

Reviews
Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!


No posts found
 

Discussions

Loading...
122