ST-LINK/V2 STM8 and STM32 MCU USB JTAG in-circuit Debugger Programmer Emulator $51.64 Free Shipping @GoodLuckBuy.com

Quantity	5+	20+	50+	100+
Price	$49.57	$48.02	$46.99	$45.96

ST-LINK/V2 STM8 and STM32 MCU USB JTAG in-circuit Debugger Programmer Emulator

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

STM8 applications use the USB full speed interface to communicate with STMicroelectronic's ST Visual Develop (STVD) or ST Visual Program (STVP) software.

STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

Key Features

5 V power supplied by a USB connector
USB 2.0 full speed compatible interface
USB standard A to mini B cable
SWIM specific features
- 1.65 V to 5.5 V application voltage supported on SWIM interface
- SWIM low-speed and high-speed modes supported
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
- SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
JTAG specific features
- 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs
- JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
Direct firmware update feature supported (DFU)
Status LED which blinks during communication with the PC
Operating temperature 0 to 50 °C

Application Example

Connecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connection:

Previous: 0.39" 4 Digit LED Display Red 7 Segment Clock Time Temp Voltage Display

Next: STM32F4DISCOVERY STM32F407 STM32 ARM Cortex-M4 Development Board Embed STLink/V2

Move to view larger images

ST-LINK/V2 STM8 and STM32 MCU USB JTAG in-circuit Debugger Programmer Emulator

Our wholesale prices:

Key Features

Application Example

Discussions