Move to view larger images

new new

new new

new new

new new

new new

3-Trumpet Train Air Horn Kit 150 PSI Air System With 12V Air Compressor 150dB+

Price: $222.46
SKU: 140505
Price in points: 2225 points
Points: 21 points
Out Of Stock

Our wholesale prices:

Quantity  5+   20+   50+   100+ 
Price  $213.56   $206.89   $202.44   $197.99 

3-Trumpet Train Air Horn Kit 150 PSI Air System With 12V Air Compressor 150dB+


The horns:
Need to make a big noise, but only have a little room? These train horns can fit in almost any vehicle, but deliver the big sound you need. Don’t be fooled by their size  they may be small but they pack a punch that can rival any air horn out there. Easy to fit, glistening chrome finishing and tuned train horn sound; these horns are the complete package.

The Compressor:
Our specialized compressor kits will make you horns really sing. All of our compressor systems come complete with a 12 volt compressor, air tank, pressure switch and mounting hardware. These compressor kits are built for performance and easy installation.

Horn Features:
Overall Dimensions: 13.75"L x 7"W x 6.5"H
Trumpet Lengths: 13.75", 11.5", 9"
Trumpets Bell Width: 3.75"
DB output: 150.2 db
Construction: Chrome plated zinc alloy

Compressor Features:
One-piece tank compressor system
Dimensions: 15.75" L x 5.25" W x 6.75" H
Max Working Pressure: 150 PSI
Tank Capacity: 3 liters
Pressure Switch Settings: 90 PSI on, 110 PSI off
Duty Cycle: 15%
Thermal Protection: Yes


Condition: New
Type: Installation Kit
Placement on Vehicle: Left, Right, Front
Brand: Vevor
Surface Finish: Chrome
Manufacturer Part Number: Z009+Z003
Interchange Part Number: Air compressor with horn
OE Spec or Performance/Custom: Performance/Custom
Other Part Number: Train horn Kit

How to use

 1. Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.
2. Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems THE VALVE MUST BE REMOVED before the evaporator can be flushed. FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET.
Warning: Newer Style condenser designs are very hard, and sometime it would be impossible to do flush, In those cases it is suggested that if the compressor has a major failure the condenser should be replaced.
3. Drain all the oil from the new compressor and dispose of according to local, state and federal laws. NOTE: if you compressor has a drain plug you will need to open it up and drain what oil is in there too.
4. Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
5. Install new receiver drier or accumulator and new orifice tube or expansion valve.
6. Evacuate the A/C system for a minimum of one hour.
7. After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
8. Start engine whit A/C controls on MAX AIR with door and windows open.
9. Add the remaining charge of refrigerant as called for by the manufacture.

Package Included:

- 1 x 3-Trumpet Train Air Horn Kit 150 PSI Air System With 12V Air Compressor 150dB+

Previous: Front Bumper Chin Lip Spoiler Wing Guard Protect Body Kit for 2018 Honda Accord Matte Black

Next4.8 CFM Vacuum Pump HVAC A/C Refrigerant W/4 Valve Manifold Gauge

Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!

No posts found