Move to view larger images

new new


400W EV-Peak CQ3 QUAD 4 Port 10Amps LiPo LiHV Battery Charger HRC44167

Price: $215.57
SKU: 137023
Price in points: 2156 points
Points: 20 points

Our wholesale prices:

Quantity  5+   20+   50+   100+ 
Price  $0.00   $0.00   $0.00   $0.00 

400W EV-Peak CQ3 QUAD 4 Port 10Amps LiPo LiHV Battery Charger HRC44167


LiHV Battery Support
This high-end charger supports the new LiHV chemistry battery! Charge, discharge and storage charge your LiHV's

Charge FOUR batteries at once! Even if they are not the same chemistry, voltage, or capacity. This charger has 4 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply. The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.

High Power:
The CQ3 can output up to 100Watts/10Amps from each port at the same time! Each port is fully independent of each other and has its own dedicated power! Using 100Watts/10Amps on a port in no way limits any of the other ports' ability to charge to its full potential! Max the charger out by using 100Watts/10Amps on each port at the same time for a total of 400Watts!

EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. Their reliability rivals that of name brand manufacturers such as Hitec, Duratrax, Traxxas, etc. And all this is backed by an easy 1 year warranty!

High Power Output:
This charger boasts 100Watts of power per port! Most chargers such as Hitec only offer 50Watts per channel. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a 10Amp charge rate!

Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.

Lithium Cell Check
Check the voltage of a Lithium battery's cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cell’s voltage.
Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiHV, LiIo, LiFe, Pb batteries.


- AC Input voltage AC 100V-120V OR 220V-240V
- DC Input voltage range DC 11.0V-18.0V
- Charge current range 0.1A-10.0A per port
- Discharge current range 0.1A-5.0A per port
- Charge power limited 100W x 4
- Discharge power limited 10W x 4
- Balance current max 400mA
- Balance tolerance ±0.01V
- NiCd/NiMH battery cell count 1-16cells
- Lithium battery types Li-Po, Li-HV, Li-ion, Li-Fe
- Lithium battery cell count 1-6 series
- Pb battery voltage 2V-24V
- mAh Capacity: 100mAh - 25,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
- Dimensions 240mm x 192mm x 65mm

Package Included:
- 1 x CQ3 4 Port Charger
- 1 x  Power Cord
- 4x JST-XH Balance Boards
- 4x Deans T-Plug Charge Cables
- 1 x Manual

Previous: Foldable DJI Mavic Air Drone 4K 100Mbps 3-Axis RC Quadcopter Red

Next1350W EV-PEAK A9 High-power Battery Charger For 1-8s 10s 12s LiPo LiHV LiFe Bat

Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!

No posts found