Move to view larger images

new new

AUTOOL BT-660 Car Battery Tester w/ Printer BT660 for Flooded AGM GEL EFB

Price: $111.31
SKU: 136908
Price in points: 1113 points
Points: 10 points

Our wholesale prices:

Quantity  5+   20+   50+   100+ 
Price  $106.86   $103.52   $101.29   $99.07 

AUTOOL BT-660 Car Battery Tester w/ Printer BT660 for Flooded AGM GEL EFB


1. One year warranty, lifetime maintenance, and free upgrade for 3 years
2. Application: 12V automotive cranking lead acid battery and 12v/24v car system test
3. Measure Range:
CCA    100-3000
BCI    100-3000
CA    100-3000
MCA    100-3000
JIS    26A17--245H52
DIN    100-2500
IEC    100-2500
EN    100-2500
SAE    100-3000
GB    30AH-220AH
4. Working Environment Temp: -10 C -50 C
5. Special test clip: Double conductance Kelvin clamp
6. Housing Material : Acid-resistant ABS plastic
7. Measure Range: 30AH-200AH
8. Voltage Measure Range: 7-30VDC

Main Function:
1. Battery Test
 Select the battery test and press OK key to continue
 Battery Type: select your battery type, usually is “Regular Flooded”
 Input testing standard: the standard which you can see the front of the battery ,such as CCA、BCI、DIN. If you can’t find
 any info about the standard, you can choose GB standard. Choose GB standards would lead little tolerance.
 Input rated capacity: you can see the starting current standards in front of the battery
 Then press OK key to start testing.

2. Cranking Test
Starting the engine as prompted, tester will automatically complete the cranking test and display the result.
Normally, cranking voltage value lower than 9.6V is regarded as abnormal and it is OK if it is higher than 9.6V.
Test result of the tester includes actual cranking voltage and actual cranking time.
When cranking test is abnormal, battery test result will also be displayed at the same time.

3. Charging Test
When enter the charging test, tester will prompt "Loaded testing"
Note: Do not shut down the engine during the test. All electrical appliance and device are in OFF state. Turn on/off any electrical appliance in the vehicle during the test will affect the accuracy of the test result.
Operate accordingly to increase the engine rotating speed to 2500turns, and keep for 5 seconds.
Tester starts the charging volt test after increase rev detected.
After the test finished, tester displays the effective charging volts, ripple test result and charging test result.

4. Review Data
After entering the forth function, then press OK key you can view the final test result.

5.Print Data
You can print out the test result with built-in printer.

6. Export Data
Connect this battery tester to computer

Package Included:

- 1x AUTOOL BT-660 Car Battery Tester

Previous: Autool BT360 Battery System Tester Car Charging Analyzer for 12V Standard Car


Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!

No posts found