Move to view larger images

new new


Leadshine DM2282 Digital Stepper Motor Driver 150-230 VAC With 0.5-8.2A

Price: $183.11
SKU: 136880
Price in points: 1831 points
Points: 17 points

Our wholesale prices:

Quantity  5+   20+   50+   100+ 
Price  $175.79   $170.30   $166.63   $162.97 

Leadshine DM2282 Digital Stepper Motor Driver 150-230 VAC With 0.5-8.2A


- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movemen
- Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Microstep resolutions programmable, from full-step to 102,400. It can also be set via DIP switches.
- Soft-start with no "jump" when powered on
- Supply voltage up to +220 VAC
- Output current programmable, from 0.5A to 8.2A. It can also be set via DIP switches.
- Maximum frequency: 200KHz
- TTL compatible and optically isolated input
- Automatic idle-current reduction (Reduction rate can be software configured)
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Over-voltage, Under-voltage, over-current, phase-error protections

- Output Peak Current: 0.5~8.2A
- Input Voltage: +80~220VAC
- Logic Signal Current: 7~16mA (Typical 10mA)
- Pulse Input Frequency: 0~200kHz
- Isolation Resistance: 500MΩ
- Cooling: Natural Cooling or Forced cooling
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0℃ - 50℃
- Humidity: 40%RH-90%RH
- Operating Temperature: 70℃ MAX
- Storage Temperature: -20℃ - 65℃
- Weight: Approx.1.3kg (45.86oz)

Package Included:

- 1 x Leadshine DM2282 Digital Stepper Motor Driver

Previous: Leasdhine DM1182 Digital Stepper Drive 115 VAC Input 8.2A 2 Phase

NextCDI Wiring Harness 50cc 70cc 110cc 125cc + Remote Start Switch for Electrics ATV

Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!

No posts found