Move to view larger images

new new

new new


Mach3 USB 2MHz CNC 3 Axis Motion Control Card Breakout Board + 10.1" Panel for Windows

Price: $730.98
SKU: 137988
Price in points: 7310 points
Points: 69 points

Our wholesale prices:

Quantity  5+   20+   50+   100+ 
Price  $701.74   $679.81   $665.20   $650.58 

Mach3 USB 2MHz CNC 3 Axis Motion Control Card Breakout Board + 10.1" Panel for Windows


- Fully support all Mach3 version
- Support save data when power off.
- Support spindle speed feedback
- Support 3 meter USB cable
- Supports Up 6-axis
- Maximum step-pulse frequency is 2000KHz.Status indicator LED can be useful to show the USB
- Connection,and working status by flashing.
- 16 general-purpose input,8 output has speed function,the spindle actural speed Mach3
- Interface in real-time display
- All IO-port isolation,interference,stable performance
- Ful support for USB hot-swappable,the card is Monitoring USB connection status at any time,

1.Standard usb device and work at all windows with usb hot plug.
2.The card state is monitored.
3.Support 6 axis to motion at the same time.
4.Step Pulse frequncy Up to 2000khz,support servo and step motor driver.
5.The usb state indication with led
6.All io is isolated,anti-noise and stable performance
7.Spindle control with PWM and step/pulse
8.Aluminum shell,shield the interference.
9.Speed index function.
10.Power off and continue function

- CPU:Dual-Processors, ARM+FPGA
- Axis output control:
- Drive Current:Isolated open collector output; 5V, 20mA
- Drive:Pulse + direction output
- Output frequency:2000 KHZ (2MHz)
- Axis:MK3-M4:3-axis
- Isolation Voltage:3.5KV
- Spindle inverter output
- Analog voltage output:0-10V
- PWM output:5V, 1KHZ, Duty;  0-100%
- Pulse + direction output:5V, 15HZ to 4 KHZ
- Spindle speed input
- Input:Isolated input, 5V pulse signal
- Isolation Voltage:3.5KV
- 8 IO output
- Drive Current:Isolation: 50mA, 25V
- Isolation Voltage:3.5KV
- 16 IO input
- Input Current:Isolated inputs, 5 mA, maximum voltage 25V
- Isolation Voltage:3.5KV
- Mach3 Port Position:P1 Port
- USB interface:Complies with USB2.0 standard
- Weigtht:0.7KG

Software installation:

- First,install Mach3 software to your PC.
- Second,copy your driver into Mach3.Check readme file in the CD.
- Check our wiring for reference,connect our card to your machine correctly.
- Connect your PC to our card by using network cable.
- After these steps,you can open your Mach3 software for operating.

10.1 inch Mach3 CNC Computer Data Panel

Package Included:

- 1 x MKX-V motion card    
- 1 x Use wire    
- 1 x Driver disk    
- 1 x MACH3-USB trouble shooting    
- 1 x MACH3 config and driver installation    
- 1 x MKX –V user Manual

- 1 x 10.1 inch Mach3 CNC Computer Data Panel

Previous: Mach3 4 Axis Breakout Board CNC USB Motion Control Card 2MHz MK4-V + 10.1" Panel

Next10.1 inch Mach3 CNC Computer Data Panel

Write a ReviewPost PhotosPost Videos, and get GoodLuckBuy points!

No posts found